Lacing and Stitching Visual Guide

HOLD END OF LACE DOWN WITH FINGER

BIGHT (CROSS)

/

WITH FINGER

/

END LACE C RELEA

Double Loop Lacing 1 Beginning on the front side of the project, pull the needle through the 1st slit. Leave a short tail end. Go on to the next slit.

Double Loop Lacing (Continued)

Estimated Lace Amount: 9x the size of project. See page 4 for more info.

HOLD END OF LACE DOWN WITH FINGER

HOLD END OF LACE DOWN WITH FINGER

BIGHT (CROSS)

6

2

When lacing a corner, stitch through the three corner slits twice each. Be sure to go through each bight on all corner stitches. It can help to punch a hole that corresponds to the lace thickness you are using in each corner hole. END OF LACE CAN BE RELEASED

Pull the stitch tight; lacing over the end you left free. This forms a cross or “bight”.

END OF LACE CAN BE RELEASED

END OF LACE CAN BE RELEASED

HOLD END OF LACE DOWN WITH FINGER

HOLD END OF LACE DOWN WITH FINGER

HOLD END OF LACE DOWN WITH FINGER

BIGHT (CROSS)

HOLD END OF LACE DOWN WITH FINGER

BIGHT (CROSS)

/

LACE THROUGH THREE CORNER SLITS TWICE EACH LACE THROUGH THREE CORNER SLITS TWICE EACH

/

/

END OF LACE CAN BE RELEASED

7

8

From back side pull the end of the lace out of the slit.

Continue lacing to starting point. Use a modeling stylus to pull end of lace free of stitches.

HOLD END OF LACE DOWN WITH FINGER

3

END OF LACE CAN BE RELEASED

HOLD END OF LACE DOWN WITH FINGER

BIGHT (CROSS)

Push the needle under the cross or “bight”. Hold the end of the lace down on the opposite side. Pull the stitch under the bight snug but not tight. Lace through the next slit.

HOLD END OF LACE DOWN WITH FINGER

MAINTAIN LOOP HOLD END OF LACE DOWN WITH FINGER

BIGHT (CROSS)

HOLD END OF LACE DOWN WITH FINGER

LACE THROUGH THREE CORNER SLITS TWICE EACH

HOLD END OF LACE DOWN WITH FINGER

HOLD END OF LACE DOWN WITH FINGER

LOOP

END OF LACE CAN BE RELEASED HOLD END OF LACE DOWN WITH FINGER

LACE THROUGH THREE CORNER SLITS TWICE EACH LOOP

END OF LACE CAN BE RELEASED

MAINTAIN LOOP

/

/

LACE THROUGH THREE CORNER SLITS TWICE EACH

LACE THROUGH THREE CORNER SLITS TWICE EACH

4

5

9

TUCK END BETWEEN LEATHERS Lace through the next hole. Now that you laced a few slits. The end of the lace can now be released as it is now locked in place.

Follow steps 1 - 3 making a cross or bight. Once again go under the bight and pull the stitch snug.

From front side, pull end of lace out of the loop. Push stylus down between the leathers and hook it over the end of the lace.

END OF LACE CAN BE RELEASED

TUCK END BETWEEN LEATHERS

MAINTAIN LOOP

MAINTAIN LOOP

LOOP

LOOP

TUCK END BETWEEN LEATHERS END OF LACE CA BE R LEASED

LOOP

TUCK END BETWEEN LEATHERS

LOOP

MAINTAIN LOOP

LOOP LACE THROUGH THREE CORNER SLITS TWICE EACH

LOOP

LACE THROUGH THREE CORNER SLITS TWICE EACH

LOOP

LACE THROUGH THREE CORNER SLITS TWICE EACH

MAINTAIN LOOP

LOOP

7 LACE THROUGH THREE CORNER SLITS TWICE EACH

8