Springfield Leather Supply Guide (updated 5/2023)

THREAD STAND This thread stand enables a smooth feed off the top of the thread cone; which eases tension problems. Approximately 18” high and has a hefty metal base. Order# 120-011

SPEED REDUCER As the name implies, this gadget slows down the speed of your machine. It works kinda like the big sprocket on a 10-speed bicycle. The larger size wheel spins slower than a smaller one! Also adds torque. Who needs to be in a rush anyway? Adds tremendous power at slow speeds. Order# 355-21

SERVO MOTOR AC/DC 110 Volts-60 Hz. 0-3000 RPM, 550 watts, speed adjustable dial. Switch included. Order# 355-400

COMMERCIAL DUAL THREAD STAND This heavy duty metal thread stand holds two spools and enables a smooth feed off

ROLLER EDGE

the top of the thread cones, easing tension and preventing feed problems. Order# 84-5792

STRAIGHT EDGE

FLIP DOWN ROLLER EDGE GUIDE The Flip Down Roller Edge Guide makes simple work of stitching borders and edges! Can be easily mounted and adjusted to fit a wide range of widths and sizes of leather. Comes with two replaceable attachments: One straight edge guide and one roller guide. Fits Cobra Class 20 machines.

FLIP DOWN ROLLER EDGE GUIDE CLASS 26 AND CLASS 3/4 One straight edge guide and one roller guide. Fits Cobra Class 26 or 3/4 machines.

CLASS 26 CLASS 3/4 ORDER # ORDER# 527-36 527-35

Order# 527-37

4 TON CLICKER PRESS Clicker Press, Hand Operated 29” handle to give lots of leverage, and a swivel-away head, for easy die placement. Will work with 1/4”–1 1/4” dies. Aluminum plate on the head allows you to use double edged dies when necessary. Pre drilled required, and

OSBORNE SPLITTER This splitter is designed to be attached to a sturdy table or work bench. It features a solid cast iron frame, a 6" hollow ground blade, and a fine tuning adjustment for splitting any thickness of leather evenly and easily! Includes instruction sheet. 6 lbs. ITEM ORDER # Osborne Splitter 88-86

it ships in two boxes. Clicker board is 8-3/8 x 1-7/8” (replacements available) Machine is 43” high with handle extended, 15” wide, and 10” deep. 145 lbs.

ITEM ORDER #

131-1

4 Ton Clicker Press

All pricing is subject to change without notice! Not responsible for pictorial or typographical errors.

192