Springfield Leather Supply Guide (updated 5/2023)

O'BRIEN HEAVY DUTY ROUND ARCH PUNCHES These punches are machined from top quality hardened tool steel by experienced craftsmen, and feature a unique welding system that assures that the stresses created by use are distributed on the shaft, and not the weld itself, as well as thicker side wall construction than found in lesser quality tools. Each tool also features a full arch and a tapered clearance to assure that the punchings clear freely, minimizing your fatigue while working. These punches are also already hand sharpened and polished, ready to use!

HEAVY DUTY ROUND ARCH PUNCHES SIZE ORDER # 1/2" (12.7mm) 335-801 3/4" (19.1mm) 335-802 1" (25.4mm) 335-803 1-1/4" (31.7mm) 335-804 1-1/2" (38.1mm) 335-805

For cutting symmetrical tips on all belts and straps up to 2" wide. CRAFTMASTER MULTI-SIZE STRAP END PUNCH

Order# 011-320000

CRAFTMASTER ROUND STRAP END PUNCH High-quality punch for rounded ends on up to 1-1/2” strips.

ECONOMY ENGLISH POINT STRAP END PUNCHES

SIZE ORDER # 1" (25.4mm) 011-319803 1-1/4" (31.7mm) 011-319900 1-1/2" (38.1mm) 011-319901

Order# 011-315104

SIZE ORDER # 1/4" (6.4mm) 3/8" (9.5mm) 88-015002 1/2" (12.7mm) 88-015003 5/8" (15.9mm) 88-015004 3/4" (19.1mm) 88-015005 7/8" (22.2mm) 88-015006 1" (25.4mm) 88-015007 1-1/8" (28.6mm) 88-015008 1-1/4" (31.7mm) 88-015009 1-3/8" (34.9mm) 88-015010 1-1/2" (38.1mm) 88-015011 1-5/8" (41.3mm) 88-015012 1-3/4" (44.5mm) 88-015013 1-7/8" (47.6mm) 88-015014 2" (50.8mm) 88-015015 88-015001

OSBORNE ENGLISH POINT STRAP END PUNCH Available in 1/8" increments from 1/4" up to 2".

OSBORNE ROUND STRAP END PUNCH

Available in 1/8" increments from 1/4" up to 2".

SIZE

ORDER # 88-15001 88-15002 88-15003 88-15004 88-15005 88-15006 88-15007 88-15008 88-15009 88-15010 88-15011 88-15012 88-15013 88-15014 88-15015

1/4" (6.4mm) 3/8" (9.5mm) 1/2" (12.7mm) 5/8" (15.9mm) 3/4" (19.1mm) 7/8" (22.2mm) 1" (25.4mm) 1-1/8" (28.6mm) 1-1/4" (31.7mm) 1-3/8" (34.9mm) 1-1/2" (38.1mm) 1-5/8" (41.3mm) 1-3/4" (44.5mm) 1-7/8" (47.6mm) 2" (50.8mm)

OSBORNE MULTI-SIZE STRAP END PUNCH

Cuts a nice clean end on belts and straps. Polished and hardened edge with a cutting width up to 2"(50.8mm).

Order# 88-152

All pricing is subject to change without notice! Not responsible for pictorial or typographical errors.

204