Springfield Leather Supply Guide (updated 5/2023)

HARDWARE & FASTENERS

BELT & HOLSTER CLIPS These are used for attaching things to your belt. Usually holsters, but the smaller ones can be used for just about anything, including cellphone cases, knife sheaths, etc. Now, all our Holster/Belt Clips have the same convenient pricing structure! See the pricing Chart below.

SPRING BELT CLIPS (7/8” x 3-1/4”) QTY ORDER # NICKEL Each 5-135400

(7/8” x 3”) QTY NICKEL BLACK Each 5-12400 5-124024 25 pk. 5-124025 5-124027 100 pk. 5-124026 5-124028 REGULAR BELT/HOLSTER CLIPS

(7/16” x 2-3/4”) QTY NICKEL BLACK Each 5-123800 5-123824 25 pk. 5-123825 5-123826 100 pk. 5-1238100 5-123827 SMALL BELT/HOLSTER CLIPS This is a twist lock clip that’s made for cases and holsters. It consists of two parts: a mounting bracket with a unique tabbed post (that attaches to the case) and a patented clip (that attaches to a belt) that has a slot that’s been specially designed so when you slide the clip onto the bracket and twist, it locks in place. You can insert the case into the swivel belt clip in any direction, but the only way to release it is to turn the case upside down. Provides the ultimate in convenience, security, and functionality! Great for making Law Enforcement gear, Two-way Radio Cases, and more! POWERWEDGE SWIVEL CLIP

25 pk. 5-135425 100 pk. 5-1354100 BLACK Each 5-123924 25 pk. 5-123925 100 pk. 5-1239100

1/4”

3/8”

3/8”

Back View of Clip

EYELETS/HOLSTER RIVETS Black oxide finished eyelets, also referred to as holster rivets! For use in conceal carry style holsters to attach kydex to 9/10 oz leather. 1/4” inside hole diameter and 3/8” outside diameter with a post length of 3/8”. For best results, set with Osborne 3/16” Grommet Setter #85-23505.

QTY. 10 pk. 50 pk.

ORDER # 115-128920 115-128925

Order# 305-1

T-NUTS FOR HOLSTER MAKING Flat-top counter sunk screw, a fender washer, and a 3-prong t-nut, ensures your screw post doesn't spin! Popular with Kydex/leather holster and case makers. Phillips head screw measures 3/8" in length, T-nut has 1/4" post. Black finish. 10 pack.

Locking squeeze clip measurements: Back is 2-1/4”, Front is 2-1/8”, and the Width is 3/4”. Available in Black Only. PLASTIC LOCK SQUEEZE CLIP

Order# 411-01

THUMB BREAK STIFFENER A thumb break is a safety device installed on many holsters (usually OWB) and sheaths to prevent a weapon from being unintentionally drawn, or preventing an unauthorized person from drawing a pistol or knife from another person’s body, and also securing the weapon in the holster or sheath when its owner is engaged in vigorous activities. Thumb breaks are usually made out of leather or nylon, so our thumb break stiffener works in conjunction with whatever material you use. Made out of stainless steel and may be either permanently attached or removable. It’s usually held in place by a snap mechanism, which can be disengaged by pushing your thumb upward against it. 1-3/16” x 1/2”. Sold in a 2 pack Order# 916-1

Order# 85-1500

Fender Washer

Screw

3 Prong T-Nut

EXTRA LARGE BELT & HOLSTER CLIP

XL black oxide belt and holster clip. Measurements: Back is 3-1/2”, Front is 2-7/8”, and the Width is 1-1/4”. Available in Black Only.

TRI RINGS New holster slide made out of a strong zinc alloy. Matte black only. Will fit strips up to 1-5/8”. Sold by the pair!

Order# 85-1728

Order# 020-800872

Phone: 1-800-668-8518

springfieldleather.com

259